Home Introduction Products Trade online Contact us
Jet Mill Series
QS Horizontal Disk-Type Jet Mill
QLD/QLZ Liquified Bed-Type Jet Mill
QON Circulation Tube Type Jet Mill
QBN450 Target Jet Mill
Machinery Mill Series
JCW Hammer Type Machinery Mill
JCF Classifier Mill
JBL Pin Machinery Mill
JJ (A) Cutting Type Pulverizer
JCL Double-Shaft Micron Grinder
ZDM High Efficient Vibrating Micron Mill
Whey Pulverizer
Grading Series
FYW Grader
FQZ Classifier
FSZ classifier
Drying Series
QJD Batch Heating Agitator Drier
YP Spray Drier
XSZ Spin Inner-vaporization Drier
ZL Vibrating Fluid Bed Dryer
Other Series
BWF-250 fine powder packing machine
CZL500 pelletizer, CZL750 pelletizer
SSB classifier
JCF Classifier Mill

Principle:
The product to be ground is fed from above via a rotary airlock directly into the grinding chamber through the classifying chamber where particles are bumped mutually and strongly against the impact beaters, meanwhile, to be impaceted frictionated and sheared in the gap between the impact beaters and liner. The pulverized product is conveyed to the ultra-fine classifier. The end product is discharged through the blow-out opening, the coarse material rejected from the classifier is recirculated for further grinding.

Features:
• The machine is new combined equipment which is composed of grinding and classification in one machine, conpact construction.
• The machine is unrivalled ease of cleaning inspection and maintenance because it is equipped with an separation mechanism, easy opening the grinding chamber and classfing chamber.
• Powder production capacity. The maxmum rare-material particles with diameter is permitted approx. 15mm. It can randomly select powder particles with a diameter range from 8-150um.
• It is universally applicable for almost all products up to a hardness of approx. 3.5 Mohs. It is also adaptable to the pulverization of approx. 7 Mohs hardness if use speacial wear-resisting material.

 
Flow Diagrammatic Sketch
 
1 Storage bin 2 Main body 3 Cyclone collector
4 Bag collector 5 High pressure fan
Usage: Pesticide, limestone talcum, kaoline, silicon, dioxide, corundum, aluminium, lactose, cocoa, mixture etc.
 
Main Technical Parameters
 
JCF400
JCF630
JCF1000
JCF1250
Classifier
Mill
Classifier
Mill
Classifier
Mill
Mill
DRIVE POWER mm
5.5(7.5)
15(18.5)
11
37
15
75
160
SPEED max r/min
6000
5600
4000
3550
240-2400
2250
1800
CAPACITY Kg/h
40-400
50-1000
400-3000
3000-4500
WEIGHT Kg
807
2450
5330
 
OUTER DIMENSION mm
1460×780×1707
2145×1330×1710
3460×1866×2350
 
MATERIAL PARTICLE SIZE max mm
5
≤5mm
15
 
FINENESS d97 um
6-120
10-120
8-150
 
FAN AIR QUANTITY m3/h
1000-1500
2950
6000-10000
 
FAN AIR PRESSURE mmH2O
2000-3000
18496 Pa
1300
 
FAN POWER Kw
15
30
45(55)
 
Grinding Size  (μm)       9-200
 
 
Copyright(C)2006,Shanghai Xichuang Powder Equipment Co., Ltd(Formerly Shanghai Chemical Machinery No.3 Factory) All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle Copyright Notice
߹ۿcorn