Home Introduction Products Trade online Contact us
Jet Mill Series
QS Horizontal Disk-Type Jet Mill
QLD/QLZ Liquified Bed-Type Jet Mill
QON Circulation Tube Type Jet Mill
QBN450 Target Jet Mill
Machinery Mill Series
JCW Hammer Type Machinery Mill
JCF Classifier Mill
JBL Pin Machinery Mill
JJ (A) Cutting Type Pulverizer
JCL Double-Shaft Micron Grinder
ZDM High Efficient Vibrating Micron Mill
Whey Pulverizer
Grading Series
FYW Grader
FQZ Classifier
FSZ classifier
Drying Series
QJD Batch Heating Agitator Drier
YP Spray Drier
XSZ Spin Inner-vaporization Drier
ZL Vibrating Fluid Bed Dryer
Other Series
QLD/QLZ Liquified Bed-Type Jet Mill

The material is transported into the griding bin. The grinding air enters into the grinding bin through the opposed nozzles fluidized other product bed. The accelerated product particles meet in the point of intersection of the jets and size reduction is exclusively mde by particles collision the fluidized bed. The ground product is transported to the turbine ultra-fine classifier in an upwards air flow, the final product enters into a collector through the fine material discharge, the coarse materials returns back into the product bed.

QLD Type Fluidized Bed Opposed Jet Mill contains pulverization, classification mixture and homogenization into an organic whole.

(1)High impact speed, the accelerated air stream from nozzles in impacted on particles to produce very high speed, high grinding effeciency.

(2)Low energy consumption. Comparing same kinds of jet mills, it can save approx, 30%-40% more energy.

(3) Less wear, its main grinding performance is the mutual impact and bump, the high-speed particles rarely hurls the wall, additionally, the materials will not pass the nozzles, so it is applicable to pulverization of highly hard substance.

(4)The unit is equipped with a turbine-type ultra-fine grader inside, so it features high precision in grading, narrower in distribution of particle sizes.

(5)Automatic operation without permanent supervision by personnel.

(6)Very low noise emission.

(7) Compact in construction, minimun amount of the floor space.

Flow Diagrammatic Sketch
1. Vibrating Storage 2. Cyclone Collector 3. Bag Collector 4.Jet Mill 5.Air Cooling Dryer
6.Gas Receiver 7. Cooler 8. Air Pressure Compressor 9. Blower Fan
Usage: Widely used in the grind of resin, bakelite, PVC, pigment, dyes, powdery coating, couping component , medicine, cosmetic, high grade ceramic, ceramic powder, metal powder, food, flavors, stearic acid, fat, wax, minral powder, pesticide and Wp etc. Best choice for high pure super hardness material.
Main Technical Parameters
Model Index
Air consumption m3/min
Operation pressure MPa
Power kW
Fineness um
QLD 350
QLD 450
QLD 680
QLZ450 Fluized-bed Type Jet Mill

Grinding Air Volume
Grinding Air Pressure 0.6~0.95Mpa
Classifier Motor Power 570~4860r/min
Grader Wheel Power 7.5kw
Product Size D97=5.5~80um
Capacity 20~400kg
Copyright(C)2006,Shanghai Xichuang Powder Equipment Co., Ltd(Formerly Shanghai Chemical Machinery No.3 Factory) All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle Copyright Notice