Home Introduction Products Trade online Contact us
Jet Mill Series
QS Horizontal Disk-Type Jet Mill
QLD/QLZ Liquified Bed-Type Jet Mill
QON Circulation Tube Type Jet Mill
QBN450 Target Jet Mill
Machinery Mill Series
JCW Hammer Type Machinery Mill
JCF Classifier Mill
JBL Pin Machinery Mill
JJ (A) Cutting Type Pulverizer
JCL Double-Shaft Micron Grinder
ZDM High Efficient Vibrating Micron Mill
Whey Pulverizer
Grading Series
FYW Grader
FQZ Classifier
FSZ classifier
Drying Series
QJD Batch Heating Agitator Drier
YP Spray Drier
XSZ Spin Inner-vaporization Drier
ZL Vibrating Fluid Bed Dryer
Other Series
BWF-250 fine powder packing machine
CZL500 pelletizer, CZL750 pelletizer
SSB classifier
QS Horizontal Disk-Type Jet Mill

Principle:
High-speed jet stream which formed by compressed-air pass through feed injector make powder materials suck into grinding chamber. Pulverizing nozzles which are installed around the grinding chamber inject high-speed jet stream to grinding chamber directionally, make powder materials pulverized by the action of impaction and friction between powder materials.

High-speed jet strem form strong rotational flow in the grinding chamber, from this, the centrifugal force make powder particles do high-speed movement around the grinding chamber. When particle size is pulverized below classify size, particles come into collection system through centre discharge tube because of losing certifugal force and be broken away from the classification rotational flow by the action of centrifugal air-stream.

Features:
• QS Horizontal Disk-Type Jet Mill is applicable for dry and brittle materials to be ultrafine pulverized. It is easy to obtain particles of micron meter grade or hypomicron meter grade. Uniform size distribution.
• Obtain high-putity products by the action of autogenous between powders.
• It is applicable for hard material under hardness 8 grade and sticky material to be pulverized. because the liner could be replaced by different materials.
• It is also applicable for pulverizing of the powder materials with thermal sensitivity and lower melting point because the temperature fell with the adiabatic expansion of the compressed-air.
• No dust leakage and fly up because the container and pipes are sealed up.
• Noise below 70 db. No uibration.
• Small volume and easy to strip and clean.

 
Flow Diagrammatic Sketch
 
1. Air Pressure Compressor 2. Gas Receiver 3. Air Cooling Dryer
4. QS350 Jet Mill 5. Storage Bin 6. Solenoid Vibrating Feeder
7. Cyclone Collector 8. Star Rotary Valve 9. Bag Collector 10. Draught Fan
 
Usage: Widely used in the grind in chemical, pesticide, light, food, medicine, nonmetal mine, cosmetic industry.
 
Main Technical Parameters
Index model
QS50
QS100
QS300
QS350
QS600
QS1000
Air consumption (m3/min)
0.6-0.8
1.1-1.55
5.0-6.0
7.2-10.8
18-28
88-121
Throughput (Kg/h)
0.5-2
2-10
10-75
30-150
200-600
1000-3000
Power (kW)
7.5
13-15
37
65-75
132-250
600-750
Pressure (MPa)
0.6-0.9
0.6-0.9
0.6-1.0
0.6-1.0
0.6-1.0
0.8-1.0
Granularity (um)
Micron & submicron
 
 
Copyright(C)2006,Shanghai Xichuang Powder Equipment Co., Ltd(Formerly Shanghai Chemical Machinery No.3 Factory) All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle Copyright Notice
│Č┼÷ď┌¤▀╣█┐┤corn